Short Description
Two models of an electrically operated bed with hi lo function, backrest adjustment, leg elevating knee break adjustment and an option of trendelenburg tilt and reverse tilt. An in built double bracketed unit at the bed ends offers a choice of two different bed heights. The bed is folding. All functions are operated by a handset control. A range of accessories is available including bed length extensions.
Options
* Safety rails (steel or wooden)
* Self help pole
* Mattress support extension
* Supporting handles
Models
Two models are available - the Etude Basic and the Etude Classic.
1. The Etude Basic has a steel headboard and footboard with a wooden insert panel. The safety rails (optional) are also steel.
2. The Etude Classic has a wooden headboard and footboard as well as wooden safety rails (optional). It also has a higher load capacity than the Etude Basic model.
| Specification |
Etude Basic |
Etude Classic |
| Base Height (clearance) |
250 mm |
250 mm |
| Height |
330 or 800 mm (see aditional information) |
300 or 800 mm (see additional information) |
| Length |
2200 mm |
2400 mm |
| Load Capacity (supplier stated) |
180 kg |
220 kg |
| Width |
930 mm |
1030 mm |
Additional Dimensions
Etude Basic Electric Bed
Bed Frame Height
Height 1 - 330mm to 730mm
Height 2 - 400mm to 800mm
Etude Classic Electric Bed
Bed Frame Height
Classic low - 300mm to 700mm
Classic - 400mm to 800mm
More Details
Frame
steel frame and mattress base, frame dismantles. The standard in built, double bracketed unit at the bed ends offers the choice of two different bed heights
Headboard / Footboard
Wooden (beech) on Classic model. Steel with wooden panels on Basic model.
Adjustments
backrest angle (up to 70 degrees), legrest angle, legrest tilt (legs elevated up to a 25 degree angle), thigh angle (thighs elevated to a 20 degree angle, lower legs are supported parallel to bed base), trendelenburg tilting, reverse trendelenburg tilting
Controls: hand held push button controls
Mattress: see supplier for suitable profiling mattress options
Castors: four braked castors
Bed Rails
Metal side rails on Basic model. Wooden side rails on Classic model.
Safety Features
Cables are designed to hug the bed frame to eliminate loose cables being tangles or trapped under the bed
Power Source: mains powered
Motor: motors can be disengaged without the need for tools. Cabling between the control unit and the motor is easy to change.
Dismantling
To fold the bed, the mattress support comes away from the bed ends and can be separated manually by loosening two screws. The bed ends are then attached to the transport and storage unit (an accessory). The bed then becomes portable with castors for movement.
Note:
- legrest raise (bed frame bends at knee area and the foot end of the bed remains elevated)
- Knee break (bed frame bends at knee area and the foot end of bed remains low)
- Trendelenburg Tilt allows the entire bed to tilt so a person's feet can be higher than their head. Reverse Trendelenburg tilts the bed in the opposite direction.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp
Place Of Manufacture
Denmark
subscribers 
