Short Description

A small lift manufacturer specialising in Limited Mobility Lifts. All products are fully designed and manufactured in their workshop. Their forte is designing lifts to suit individual and difficult situations. The lifts are made to comply with Australian Standards Part14, Part 15, Part 16 and Part 3. They are generally hydraulic in design.

Options

Lift car with full roof
Open crossover roof design
Automatic door openers
Hands free telephone
Interior car fit out to your design
Enclosures to your design
Various door finishes & designs

Models

. Limited Mobility Lifts
. Residential
. Commercial
. Hoists
. Scissor Lifts

The Harwel range of vertical hydraulic passenger lifts are manufactured for residential and commercial buildings as either Limited Mobility / Infrequent Use Lifts or Passenger Lifts.

The Harwel Scissorlift is wheelchair lift suitable for residential and commercial applications.

The Harwel hydraulic hoists are suitable for materials handling including dumbwaiters and goods hoists.

More Details

LIFT FEATURES:
Quiet smooth hydraulic operation
Battery return to ground level in case of power failure
No motor room is required
Very space efficient
Speed .15m/sec (9m/min) .25m/sec - .3m/sec optional
Maximum travel:
1 metre (HW14)
7 metres (HW15)
12 metres (HW16)
Half cars (subject to lifting height) or fully enclosed cars
Platforms are available in various sizes
Lift car and door frames are available in a variety of colours

Installation

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is compulsory that the lift be inspected annually by a competent person. WorkCover requires payment for registration as well as an annual fee.

Request further details from the supplier or contact WorkCover Plant Registration Unit Tel: 02 9370 5221. If outside the Sydney metropolitan area, phone the WorkCover NSW Client Contact Centre on 13 10 50 or the nearest WorkCover Regional Office.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Standards

For some types of equipment, specific Australian Standards are applicable to the materials used in, the manufacturing and installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standards.

Harwel states that their lifts fully comply with Lift Code AS1735

Place Of Manufacture

Harwel Lifts Pty Ltd (NSW) Australia