Short Description
A pack of animal and sea creature shaped appliques with a textured surface and peel off adhesive backing. They feature heat sensitive colour changing properties. When the water temperature becomes too hot, they turn from blue to white.
More Details
*The product helps prevent accidental scalding as well as slips and falls in the tub.
*The appliques provide a textured surface which adds extra traction.
*Ideal bath water temperature is around 37 degrees C.
To Install:
1. Thoroughly clean surface of the bath tub, ensuring no residue remains. isopropyl alcohol should be used. Allow to dry thoroughly.
2. Position the Dream Baby Bath Tub Appliques. The Appliques are the best placed with a space of 2.5 to 5cm apart.
3. Remove the protective backing paper from one of the Appliques. Stick to tub by pressing down and rubbing it firmly. Check the edges are firmly in place. Repeat the procedure for all Appliques.
4. Allow the Dream Baby Non-Slip Bath tub Colour Changing Appliques to dry and set for 24 hours. (Strong adhesion is achieved b allowing this period of time for adhesive to set.)
Note:
*Whenever filling a bath tub with water, always fill with cold water first, and then add warm water. For the safety of children, never start with hot water. If Appliques start to lose color, check water temperature immediately.
*The use of bath oils may cause Appliques to lift.
*To remove Appliques use eucalyptus oil, or a similar type of product. Remember to keep the remover out of reach of children.
CAUTION: Whenever a child is climbing into or out of a bath tub, ensure child is holding an adult or the side of the tub.
WARNING: Never leave children unattended in the bathroom. There is no substitute for proper adult supervision.
Regularly check tape to ensure edges do not lift. Care should be taken to ensure adhesion is maintained.
Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Place Of Manufacture
China