Short Description

A battery operated wheelchair platform lift for straight stairways, indoors or outdoors. It can be mounted on the inside or outside of the stairway. Option of a folding seat.

Models

Only one model available

More Details

INTEGRAL HANDRAIL
The upper stainless steel track system also acts as a handrail.

DRIVE SYSTEM
. The Hiro Traction Drive System is safe, clear and eliminates the need for
machinery towers at the top or bottom of the stairs.
. Two pairs of polyurethane coated steel rollers mounted at the rear of the
platform generate the traction forces by elastically deforming the rollers and rails.
. No gear teeth or suspension ropes or chains are necessary.

FULLY AUTOMATIC OPERATION
The platform will fold up automatically to the stowed position at the press of a button. The arms fold down into the vertical position, the platform ramps fold up, then the platform folds up, concealing and protecting the arms and platform controls to create a compact and vandal safe unit which leaves the stairway virtually unaffected.

OVERSPEED SAFETY DEVICE
The Lift is fitted with an overspeed safety device independent of the drive train which stops the lift in the event of overspeed.

OPERATION
Operation is via constant pressure controls:
On the Platform: Up, Down, Stop, Key
On the Landings: Up, Down, Stop, Key

SPECIFICATIONS
Rails - Rail height and spacing is selected to meet handrail requirements.
Offset from wall - Rails are located approximately 140mm from wall.
Offset stowed - The lift folds up to within 450mm from wall.

Installation

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is recommended that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.

Request further details from the supplier or contact WorkCover Plant Registration Unit.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Germany