Short Description

A battery operated vertical inclined lifting platform with a maximum 2 metres of travel in open shaft and maximum of 4 metres of travel in closed shaft. The platform has a half height wall with control panels with constant pressure required. Takes 4 adults or 1 adult with wheelchair occupant. Suitable for indoor and outdoor use in domestic or commercial applications. Available with options and can be customised.

Options

Range of colours, finishes and door types available

Models

Different sizes and finishes available, however, to be compliant with BCA E3.6 (limited mobility access) platform must be 750mm wide x 1000mm deep

More Details

METHOD OF LIFT OPERATION
constant pressure

METHOD OF DOOR OPERATION
automatically closing, manual opening (can be automatic)

ACCESSIBILITY OF CONTROL PANEL WITHIN THE LIFT
wheelchair accessible height

MOTOR
battery operated electrically charged traction drive

Installation

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is compulsory that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.

Request further details from the supplier or contact WorkCover Plant Registration Unit.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

The supplier claims that this lift is fully compliant with AS 1735 Part 14 for travel up to 1 metre and compliant with AS 1735 Part 15 for travel up to 4 metres

Place Of Manufacture

Italy