Short Description

A portable ceiling hoist with a battery powered vertical movement using a hand held control. A Pass Through System feature allows both the lift cassette and user to transfer directly from one track to another. A range of slings is available. Various options are available including various tracking options.

Options

Various two point and four point slings available.
Single, parallel, straight, curved and room covering style tracking. The tracking can be made at various heights from the roof.
Gantry system

Models

Also available is the Arjo Maxi Sky 600 - a fixed ceiling hoist with a battery powered vertical and horizontal movement

Additional Dimensions

Height NSW........................................ Unknown
Width NSW......................................... Unknown
Length of Strap................................... 2200 mm

More Details

HOIST UNIT
The hoist unit has plastic casing (fire retardant)

BATTERY
Battery Powered
2 x 2.3 amp/hr will average two to four hours to a complete charge or 30 transfers at 80kg.
Low battery indicator (audible and visual LED)
Power indicator on charging module

SPREADER BAR
Two hooked points for sling loop attachments on the standard spreader bar.
Webbing strap can be programmed to alter the distance it can raise and lower (up to 2.2m).
Wide spreader bar can spread the positioning of the sling so the occupant may be less confined.

CONTROLS
Hand held push button control on an extendible cord.
Two push buttons indicate the direction of movement.
The hand held control is a narrow, rectangular shape with a hook at the end.

TRACKING
A gantry system is available with this hoist.
Turntables within the tracking are available to allow the hoist to move in more than two directions.
Various tracking options are available to change directions or traverse the entire room.
An exchanger option can allow the hoist to transfer between tracking.

SAFETY FEATURES
Manually operated emergency lowering device.
Emergency stopping feature in case of mechanical failure (push button accessible below unit).
Electrical up and down emergency buttons.
Emergency brake

SAFETY AND MAINTENANCE
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

CE marked / ISO 10535 compliant

Place Of Manufacture

Arjo International AG (Switzerland)