More Details

Materials
All aluminium construction.

Boom
Single lifting boom which incorporates a padded spreader bar with sling attachment.

Push Handle
A curved square shaped push handle is mounted at the top of the mast.

Spreader Bar
The padded spreader bar has two attachment points for the sling. An option of a 6-point spreader bar and a 4-point positioning cradle is available.
Slings
The hoist is designed to be used with the Oxford range of slings. These are purchased separately. A range of slings is available including full back, quick fit and access slings.

Castors
Dual 100mm diameter swivel style castors on the front and rear with rear lock on brakes.

Electric Controls
Hand held controls fitted on an extendable cord with a hook to allow attachment onto the hoist. A clip located on the push handle enables the hook to securely attach to the hoist. Two push buttons operate the lift and lower functions and another two push buttons operate the leg width adjustment function.

Power source
Power is provided via a battery located on the mast at the height of the push handle.

Battery
A 12 volt, rechargeable, sealed led acid battery. The hoist has an auditory low battery charge warning.

Battery recharging
Recharging is achieved by removing the battery pack and connecting it to the charger provided. The charger can then be connected to a mains power point.

Dismantling
The hoist can be dismantled for storage or transportation: remove the centre mast from the base via a black screw knob located at the bottom of the mast just above the base.

Safety features
An emergency stop and lower button is fitted on the mast. A mechanical emergency lowering device is fitted to the electrical actuator. To activate, pull the actuator upwards.

Place Of Manufacture

Taiwan

Models

Hoyer / Oxford Pro Series - Presence hoist

Options

* Positioning tilting frame
* Range of slings
* Weighing scale

Additional Dimensions

Internal Width of Base Closed..................... 580 mm
Castor Diameter................................... 102 mm

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.