Short Description

A mid wheel drive wheelchair with a compact base that positions the centre of gravity directly over the drive wheels. It features independent suspension on all four castors and a range of seat options. Other options including tilt in space are available. Two base sizes (mini and full) are available.

Options

. Seats: Both mini and full sizes are available with captain seat, captain seat with solid seat pan, rehab seat and rehab CG tilt seat.
. Legrests: Standard centre mount; economy style hangers and footplates;
Quickie style hangers and footplates, Quickie style ELR hangers with calf supports. The last three options have two piece swing away footplates
. Electronics: Standard VSI Controller or Tilt VSI Controller
Attendant control (requires upgrade to Qtronix system)
. Crutch holder.
. Walker holder
. Oxygen bottle holder.
. Lift up stump support

Models

Two models available - the primary differences are the amount of power and type of suspension.
1. Full size (F11) - 460mm and 500mm seat width. Suitable for indoor/outdoor terrain.
2. Mini (M11) - 460mm and 500mm seat width. The Mini has less power that the Full Size model and is more suited to indoor use and even terrain
Standard features on both models:
- High back Captain Seat
- Quick change shrouds (multi colour)
- Centre mount footplate
- VSI 4 button integral controls

Additional Dimensions

Full Size
Overall Length 990mm
Overall Height 1250 - 1160mm (depending on
headrest position)
Recline angle 0-120 degrees
Max incline 15 degrees
Max. curb height 76mm
Speed 10km/hr
Seat weight 16kg
Weight Heaviest Part 50kg (base)
Weight overall 66kg

Mini Model
Overall length 978mm
Recline angle 0-120 degrees
Max incline 15 degrees
Seat weight 16kg
Speed 8km/hr
Max. curb height 63mm
Max incline 15 degrees
Weight Heaviest Part 48kg (base)
Weight overall 63.3kg
Turning circle 514

More Details

FRAME
Suspension system - enables the chair to climb obstacles up to 70mm high.

SHROUD
(coloured plastic motor cover) - can be quickly removed, to be replaced with another colour wheel base. Colours - red, blue, black, champagne

SEAT
Both mini and full sizes are available with captain seat, captain seat with solid seat pan, rehab seat and rehab CG tilt seat.
. The Captain Seat has two tone vinyl or cloth upholstery, padded seat and high back with adjustable headrest. The seat height is adjustable to 4 heights in 30mm increments with pin release, and the seat can be tilted using these adjustments. The reclining back can be adjusted to five positions. Seat has lap seat belt with quick release buckle. The seat can be removed from the base by releasing the two front catches, and lifting the seat forwards and up.
. The Rehab Seat is adjustable in width and depth within a range to accommodate changing consumer needs while maintaining the same seat pan. It is available off the shelf in 16 x 16", 18 x 16" and 18 x 18" seat sizes. Other sizes can be custom ordered in size from 14 x 14" to 24 x 20" in 1" (25mm) increments. A choice of seat upholstery or solid seat pan is available. The Aspire rehab seat-frame connects to the same seat posts as those used on the captain's seat.
. CG Tilt Seat (CG = centre of gravity) has a powered tilt module featuring 0 and 3 degrees of fixed pre tilt, and 50 degrees of centre of gravity power adjusted tilt. Off the shelf packages are available in 16 x 16", 18 x 16" and 20 x 18" seat widths / depths.
. All Rehab and Tilt seats feature Quickie style armrests and hanger / footplate assemblies

BACKREST
The Captain Seat has a reclining, padded backrest with vinyl upholstery and includes an adjustable height head rest. The lever to operate the recline mechanism is located on the left side, adjacent to the rear of the seat.

ARMRESTS
Lift up, height adjustable 205mm - 285mm and 76mm width. Removable

FOOTPLATE
Height adjustable one piece metal footplate or optional swing away legrests with lift up footplates..

DRIVE WHEELS
Puncture resistant solid centre drive wheels with alloy rims. Size - 360mm for full size, 254mm for mini

REAR CASTORS
127mm diameter, solid tyres for both models. Readi-Align castors are optional and bolt onto the castor fork.

FRONT CASTORS
152mm diameter, solid tyres for both models.

BATTERIES are group 22 or group 24 for full size model U1 or 40 AH for mini model.

CHARGER
On board The charging point located in the front of the chair under the seat.

CONTROL
Dynamic 100 joystick control, can be mounted on right or left armrest.
The M11 and F11 models are programmable to five settings. The controller features flush on / off and mode switches, integral joystick, battery charge indicator, horn, and speed control.

FREEWHEELING
The motor can be disengaged and the chair free wheeled by turning red levers, located at the back of the chair.

TRANSPORTING
The chair can be broken into components for transportation. The batteries are removed by removing the safety lock-out pin and pulling the two seat release levers upwards. The seat then slides forwards and lifts off. The battery access panel is removed by inserting a flat head screwdriver between the panel and main shroud at the word "open". Push the screwdriver forward until panel lifts off. Unplug and remove batteries from rear of chair by lifting up on battery straps.

Factors To Consider

The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.

Wheelchair spaces
All new Sydney buses feature special 'kneeling suspension' and a ramp to provide easy access for less mobile passengers.

There are spaces for two wheelchairs on the new buses. These will accommodate most manual and electric wheelchairs with max. length 1250mm, max. width 750mm, max. turning circle1500mm, and max weight 200kg.

For safety reasons, passengers in wheelchairs are advised to face the back of the bus, bracing their wheelchair against the side of the space, applying the brakes and securing the seat belt of the wheelchair.

Wheelchair accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.

Maintenance

All wheelchairs require regular maintenance. Refer to User Manual for specific details

Licence & Insurance Requirements

In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.

Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Taiwan