More Details
* Zero wall proximity - operates 100mm from wall
Frame
* All frames are made from plantation pine and are glued, blocked and nailed
Uphostery
* Suspension is Zig Zag springing
* Premium high resilient foam
* European Dacron back cushions
* Available in leather
* A wide range of fabrics is available. Crypton waterproof fabrics available on request
Controls
* Controller can be placed either left or right side - right side by default
* Dual motor mechanism available for complete layout operation and independent foot and backrest operation
Motors
* All chairs are available with single motor (Omega 1) or Twin motor full layout with independent control of foot and back (Omega 2)
Footrest
* Integrated
* Spring loaded footrests for extra safety
Castors
* Mobile on castors for ease of movement. Castors disengage when lift and recline adjustments are operating
Safety
* Battery backup in case of power failure. It returns chair to home position - must be replaced after one operation
* Spring loaded footrests
Place Of Manufacture
NSW Australia
Price Guide
Prices from ILS
Models
The Range Consists of the Following
Moritz XL270
* Very high capacity twin motor electric lift (lift capacity 270kg seat width 82cm overall width 129cm)
* This chair is constructed from marine ply and is braced with steel brackets and has 200 grade foam in the seat
Moritz XL200
* Mid capacity single motor electric lift chair (lift capacity 200kg seat width 66cm overall width 111cm)
* Same construction as XL270
Aspen, Brooklyn, Coventry, Erin, Paris, Collette
* Spacesaver single motor general use electric lift chairs (lift capacity 125kg)
* The Spacesaver is the same as the Collette but with a smaller arm
* Erin Petite electric lift chair single or twin motor ( 7.5cm lower and smaller all round than normal chairs 125kg lift capacity)
* Collette Petite electric lift chair single or twin motor ( 7.5cm lower and smaller than normal chairs 125kg lift capacity)
Aspen, Coventry, Erin, Paris, Collette
* Spacesaver Twin motor electric lift chair 125kg lift capacity (twin motor allows full layout however these are not recommended to be slept in on a regular basis)
Options
* Headrest
* Arm covers available on request
* All chairs can be integrated into a suite
* Dual motor mechanism
* A wide range of fabrics including Crypton waterproof fabrics
Specification |
Aspen & Brooklyn |
Coventry |
Moritz XL200 |
Moritz XL270 |
Paris |
Spacesaver |
Armrest Height (from seat) |
|
Unknown |
Unknown |
Unknown |
Unknown |
Unknown |
Backrest Height |
|
510 mm |
Unknown |
Unknown |
510 mm |
510 mm |
Backrest Recline Angle |
|
Unknown |
Unknown |
Unknown |
Unknown |
Unknown |
Load Capacity (supplier stated) |
|
125 kg |
200 kg |
270 kg |
125 kg |
125 kg |
Seat Depth |
|
510 mm |
Unknown |
Unknown |
510 mm |
510 mm |
Seat Height |
|
510 mm |
Unknown |
Unknown |
510 mm |
510 mm |
Seat Width |
|
510 mm |
660 mm |
820 mm |
510 mm |
510 mm |
Additional Dimensions
Aspen & Brooklyn
Width..................................... 980 mm
Length.................................... 900 mm
Height.................................... 1020 mm
Coventry
Width..................................... 870 mm
Length.................................... 900 mm
Height.................................... 1020 mm
Moritz XL200
Width..................................... 1110 mm
Moritz XL270
Width..................................... 1290 mm
Paris
Width..................................... 940 mm
Length.................................... 900 mm
Height.................................... 1020 mm
Spacesaver
Width..................................... 730 mm
Length.................................... 900 mm
Height.................................... 1020 mm
Standards
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards
TGA
Many of the items on the ILC NSW website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au
When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.