Short Description
An electrically operated bed, suitable for both adults and children. It is a high - low positioning bed with natural polished timber ends. Suitable for domestic and healthcare facility use. Adjustable features include height, backrest, trendelenburg (tilt) and knee break. The bed can be folded for storage or transport (transport kit required). Available in two heights.
Options
. Wooden continuous side rails
. Self help pole
. IV pole
. Bed extension
. Transport kit
. Wooden side panels - a decoration that goes lower down on the side on the bed and hides much of the mechanism
. Range of mattresses - flat and concave
Models
"Standard" height version - 420mm - 800mm,
"Ultra-Low" version - Ultra Low - 190mm - 600mm
| Specification |
Standard bed |
Ultra Low |
| Base Height (clearance) |
Unknown |
Unknown |
| Height |
From 420 mm to 800 mm |
From 190 mm to 600 mm |
| Length |
2050 mm |
2050 mm |
| Load Capacity (supplier stated) |
175 kg |
175 kg |
| Width |
1020 mm |
1020 mm |
Additional Dimensions
Standard bed
sleeping width 900mm
sleeping length 2000mm
Ultra Low
sleeping width 900mm
sleeping length 2000mm
More Details
The natural polished timber ends are to give the bed a homely look and feel.
Frame
Steel frame with steel slats, includes 4 mattress retainers
Headboard/Footboard
Natural Beech headboard and footboard available as standard.
Adjustments
Electrically operated backrest angle
Electrically operated trendelenburg tilt and reverse tilt
Electrically operated legrest raise and kneebreak
Electrically operated high/low adjustment
Kneebreak
Controls
Electronically operated, using buttons on a hand control.
Mattress
various options available including foam pressure reduction mattresses.
Castors
Four swivel castors with brake
Steering lock
Bed Rails
Continuous, full length wooded side rails are available.
Safety Features
Euro 100 is a quality, CE Complianced European manufactured bed.
Power Source
Electrically powered, via Mains supply
Motor
Two motors - head and foot of bed.
Dismantling
Can be folded for storage, transport or for placement in the home. Transport Kit required
Note:
- legrest raise: leg section of bed elevates and bends at knee area and the foot end of the bed remains elevated parallel to the bed frame
- Knee break: leg section of bed elevates and bends at knee area so the legs below the knee are angled downwards (triangular configuration)
- Trendelenburg Tilt: allows the entire bed to tilt so a person's feet can be higher than their head. Reverse Trendelenburg tilts the bed in the opposite direction.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp
Place Of Manufacture
Poland
subscribers 
