![]() |
Ezy-As Pressure Stocking Applicator
A lightweight, rigid, plastic structure designed to assist with fitting closed and open pressure garments to upper and lower limbs. Available in medium and large sizes.

(3 suppliers)
![]() |
A lightweight, rigid, plastic structure designed to assist with fitting closed and open pressure garments to upper and lower limbs. Available in medium and large sizes.
A lightweight, rigid, plastic structure designed to assist with fitting closed and open pressure garments to upper and lower limbs. Available in medium and large sizes.
1. Place the Ezy-As stocking applicator on a suitable surface with the elongated hole facing you. Place your compression stocking inside the U-shaped Ezy-As, with the heel of the stocking facing the elongated hole.
2. Pull the top of the stocking over the Ezy-as and slide it down the sides.
3. Stop when the placement of the heel is slightly over the top and in the centre of the U-section.
4. While seated, place the applicator over your toes. Hold the heel pocket as your toes enter the stocking.
5. Release the heel pocket of the stocking when it is in line with your heel.
6. Continue moving the applicator over your foot and your heel will slide into the elongated hole as the applicator changes direction around your ankle.
7. Gently pull the applicator towards your knee.
8. Your Ezy-as applicator is then removed when free of the stocking.
Note: In cases where a Full Leg stocking is required, fit the lower portion as described. Remove the applicator at the base of your knee by simply moving it backwards then pull the upper portion of the stocking into place by hand. After the fitting, be sure the heel of the stocking is properly placed on your foot. Smooth out any wrinkles by stroking with the palm of your hands.
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Supplier | Location | Contact | Website |
---|---|---|---|
Brightsky Australia | Newington, NSW | Sales: 1300 886 601 Fax: 1300 886 602 | |
Ezy-As ABC Pty Ltd | Gumlu, QLD | Sales: 07 4784 808 Fax: 07 4784 8034 | |
Sutherland Medical Pty Ltd | Oakleigh, VIC | Sales: 1300 664 027 Fax: 1300 664 028 |
Copyright © 2009 Independent Living Centre NSW.
Site designed by the Human-Computer Interaction Laboratory, School of Computer Science and Engineering, University of New South Wales.