Short Description

A mobile, battery powered stand up hoist which brings a person from sitting to a supported standing position. It has a height and angle adjustable knee pad and removable footplate.

Method Of Use

This stand up hoist is designed to assist with the standing transfer of a person from one seated position to another seated position. The person needs to have the ability to weight bear, excepting where a four point sling is to be used.

The use of the under arm torso sling, weight bearing footplate and a cushioned, contoured knee pad provide the three points of support. It is preferable if the person can hold onto the hand grips to assist the standing process. The person needs to be able to lean back into the sling for it to be effective.

This style of hoist is useful for toileting and dressing tasks as it provides full access for attending to lower garments.

Options

A padded standing transfer sling is available in Medium or Large. It features a torso band for extra security.

Models

Only one stand up model available

Additional Dimensions

Weight (kg)....................................... 48.2 kg
Spreader Bar Height NSW........................... From 825 mm to 1670 mm

More Details

Frame
This steel framed, epoxy coated hoist has a single angled mast. A rectangular shaped push handle is mounted on the upper part of the mast.
The cylindrical hand grips allow multiple grip positions.

Controls
Hand held controls are attached to an extendable cord.

Base
The U shaped base is adjustable in width by electric control. It has swivel castors.

Footplate
The removable footplate is square with a slip resistant upper surface and raised edge.

Kneepad
The knee pad is foam padded and vinyl upholstered with a contoured surface to accommodate the shins / knees.

Battery
The rechargeable battery attaches to the rear of the mast.

Slings
See Options

Factors To Consider

It is recommended that prior to using this product, training in manual handling and the correct use of assistive devices should be undertaken.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

NSW, Australia