More Details

Frame
* A grey, epoxy coated steel frame bed with a beech wood coloured laminate

Headboard / Footboard
* Removable headboard and footboard
* A footboard extension is available in either 100mm or 200mm length

Adjustments
* The bed has electric height, backrest, leg raise and knee break adjustments

Power Source
* Via a 240 volt power point

Motor
* Silent, housed under the foot end of the bed
* The motor has battery back up

Controls
* A flexible cord with hand held controls.

Castors
* Rubber with foot operated lever pedal brakes on the rear two lockable castors

Dismantling
* The bed features tool free, snap together assembly
* The bed can be dismantled into footboard and headboard, base and side rail pieces
* A transport set is available. This enables the bed to be dismantled, transported and stored in a compact manner

Mattress
* Contact supplier for mattress options
* Tool free, removable bed ends and the frameless construction enables the mattress to sit directly on the edge of the bed frame

Bed rails
* Optional

Cleaning Requirements
* Ensure the power cord is disconnected prior to cleaning
* Do not immerse in water
* Use normal household detergents and dry after cleaning
* Do not use acids, alkalines or solvents

Note
* Legrest raise: leg section of bed elevates and bends at knee area and the foot end of the bed remains elevated parallel to the bed frame
* Knee break: leg section of bed elevates and bends at knee area so the legs below the knee are angled downwards (triangular configuration)

Place Of Manufacture

USA

Price Guide

$8995 rrp from Invacare.

Considerations

In certain circumstances there is an element of risk involved in the use of a device that attaches to the side of a bed such that there is the possibility of entrapment between the device and the mattress. This includes but is not limited to a bed pole (stick), bed rail or bed rail protector. The device may increase the risk of injury or even death to the bed occupant. Entrapment of limbs or body parts may occur with parts of the bed and the device. Some bed occupants may try to climb over a bed rail to get out of bed.

A risk assessment should be undertaken in each circumstance of use. The device should not be used in circumstances where there is a gap between the vertical components and the mattress. Users most at risk include those with physical or cognitive challenges or where the intended user's alertness is affected by medication.

Regular monitoring is recommended, particularly where the user's condition is changing.

Options

* Bed rails
* Self help pole
* IV pole
* Bed extension
* Support handle
* Transportation rack
* Bedrail trims
* Four mattress options

Models

One model is available in a single size
* Invacare Octave Four Section Electric Bed

Additional Dimensions

Overall length 2210mm
Mattress 2000mm
Backrest angle 0-57 degrees
Legrest angle 0-30 degrees
Product weight 199kg

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards

TGA
Many of the items on the ILC NSW website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.