Short Description

The Coziny 300 (cot mattress) is an alternating one in two cell cycle powered pressure relief air mattress overlay system used for prevention and treatment of decubitus ulcers. Recommended for infant's and small children at high to very high risk of developing pressure sores or for palliative care use where high comfort is necessary. A removable vapour permeable, waterproof clinical top cover comes standard.

Models

* Cot size
* Crib size

Additional Dimensions

Power Unit
Overall Width....................260 mm
Overall Length...................100 mm
Overall Height...................230 mm

More Details

* Suitable for hospitals, rehabilitation and private home community use
* Heavy duty replaceable non kink air tubing and power unit parts
* Silent power control unit 21dB with incremental pressure / comfort level adjustment

Structure
* High density air cells for optimum user comfort (no bottoming out)
* Polyurethane sealed seams for total infection control
* Heavy duty fire retardant power unit casing
* Turn dial for appropriate pressure/comfort selection
* Sewn in retaining cell straps (prevents any cell encroachment and discomfort)
* Anti kink air hosing eliminates any bottoming out.

Mattress overlay
* Secures firmly to any cot size base mattress with heavy duty adjustable nylon straps.

Power unit:
* Secures with two hangers safely over the cot foot end.
* Electric 220/230V
* Attaches to mattress overlay with umbilical cords
* On/Off switch, Pressure setting turn dial (Interface pressure gets adjusted to the user weight)
* Illuminated display status (Normal mode/low pressure), transportation/power failure hose clamp off style, and user guide is supplied .
* User friendly operating mode
* ON/OFF Switch

Cover
* Removable for laundering and fitted to under mattress
* Washable, anti-static, anti-allergenic, biocompatibility, breathable,
fire retardant, two way stretch, waterproof, weldable seams (optional) and easy to slide infant up and down the mattress on the smooth top cover surface finish reducing any shear or friction.

Customised features
* N/A

Safety features
* Warning Signals: low pressure status

Factors To Consider

* All pressure reduction products must be monitored to prevent any 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony prominences are pressed against the surface below the mattress or seating cushion. Where bottoming out occurs even with correct use (e.g. correct inflation levels), a different product may need to be used. User weights can change over time and the weight limit including linen on bed etc should not exceed the recommended product safe working load limit.

* If non-blanchable erytheme is observed either reposition the patient more frequently or upgrade to a higher level support surface.

* The mattress can be punctured.

Maintenance

12 monthly service is recommended to get the full life span of the product .This can be arranged thru Pegasus Healthcare. Avoid dropping the power unit or accidental piercings e.g. needles, and exposed springs from bed fame. Motor and mattress can be repaired as necessary.

Cleaning requirements
* Mattress, Power Control Unit AND Power Lead
* Using a sponge with hot water at 60 degrees C and with a 10:1 mixture of sodium hypochlorite/detergent (Bleach) clean the product in order; removing excess cleaning liquid after each step.
* Umbilical cord moving towards the mattress;
* The underside of the mattress
* Sides and under flaps;
* Mattress top surface
* Front, rear, top, bottom and side panels of motor including power lead
* Dry thoroughly using single use clean paper towels
(Please refer to product user manual for machine washing instructions)

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Mattress and power unit meets all International, Australian and TGA standards (supplier stated)

Place Of Manufacture

Taiwan