Short Description

The 500 Series XL Plus is an alternating air mattress system consisting of 17 interchangeable cells with low air loss, CPR and pillow function. The system includes an electronic air pump. It is designed for the medium to high risk patient. This Overlay has a load capacity of 150kg and fits all standard hospital and homecare beds.

Models

The Easy Air range of anti-decubitus and alternating air mattress systems include the below for maximum flexibility according to different patient requirements from low to high care. Please note that these are the manufacturer's degrees of risk. Please consult a health professional when considering a suitable pressure care product.

Easy Air 200 Series Low to Medium Risk
Easy Air 500 Series XL Plus Medium to High Risk
Easy Air 500 Series Lexus Medium to High Risk
Easy Air 800 Series Maxus Replacement Medium to High Risk
Easy Air 1000 Series Maxus Bariatric Medium to High Risk

Additional Dimensions

Compressor
Weight (kg) NSW................................... 1.5 kg
Length NSW........................................ 260 mm
Height NSW........................................ 130 mm
Width NSW......................................... 80 mm

More Details

Structure
* Interchangeable cells for optimum blood flow
* Compact, lightweight and portable

Attachment
* Four easy to attach corner straps.

Pump and Controls
* Compact and lightweight design
* Pump designed to suit user weight up to 150kg
* Extremely quiet
* If there is a leakage or damage in the bed causing loss of a large amount of pressure, the yellow warning light will be lit and an alarm buzzer will be activated to remind the nursing attendant to check the bed and system for problems.
* Includes hooks for easy attachment of pump to bed.
* Air pressure to weight ratio indicated and outlined on pump face control.
* Static Function

Cover
* Multi-stretch vapour permeable cover. A quilted full zip cover.

Safety Features
* Alarm
* Low pressure indicator.
* CPR FACILITY. Mattress will inflate in under 20 seconds.
* Transport Facility allows the mattress to be fully inflated while transporting mattress system.
* clip on tubes to prevent mattress from being disconnected from pump.
* Low pressure indicator.
* CPR facility. Mattress will inflate in less than 20 seconds.
* Transport facility allows the mattress to be fully inflated while transporting mattress system.
* Clip on tubes prevent mattress from being disconnected from pump.

Factors To Consider

All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (eg correct inflation levels), a different product may need to be considered.

It is advisable that a health professional be consulted when considering a suitable pressure care product.

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Place Of Manufacture

Taiwan