|
A low rise electrically operated lift which travels up to one metre with two stops. It operates with a screw and nut hydraulic drive system. The load capacity is 250kg. Suitable for indoor and outdoor use.
Standard Finish
* Aluminum platform in RAL 7035 white gray and stainless steel handrails, platform stanchions in RAL7012 dark gray
* Glass or aluminum side panels in RAL 7012 dark gray
* Aluminum gate with glass or aluminum insert in RAL 7012 dark gray
Gate
Manually operated interlocked gate
Controls
Platform controls
* Automatic or hold-to-run and emergency stop on platform console
Landing controls
* Call buttons at each landing with isolation key switch
Power Source
* Mains electricity
* Power requirements 240v
* Battery backup
Motor
1.1kw
Safety Features
* All extreme edges of the E-Type low rise platform lift have movable safety edges which immediately stop the lift when touched
* Bellows prevent access to the underside of the lift when in the up position
* Slip resistant rubber on the floor
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
| Supplier | Location | Contact | Website |
|---|---|---|---|
| Platform Lift Company | Brookvale, NSW | Sales: 1300 884 960 Fax: 02 8580 5048 |
Copyright © 2009 Independent Living Centre NSW.
Site designed by the Human-Computer Interaction Laboratory, School of Computer Science and Engineering, University of New South Wales.
