Short Description

An electrically operated platform stair lift to enable a wheelchair to traverse straight or curved stairs. It operates with a rack and pinion drive system and is suitable for indoor and outdoor use. The automatic barrier arms and platform fold to a low profile when not in use. The load capacity is 230kg.

Models

* CAMA C7 straight platform stairlift with fully automatic fold up platform and arms
* C6 curved platform stairlift with fully automatic fold up platform and arms

More Details

Drive system
Rack and opinion

Control system
Key isolated, emergency stop and hold-to-run joystick on platform and call buttons at landings

Power requirements
240v single phase

Safety Features
* All extreme edges of the platform have pressure sensors which immediately stop the lift if touched
* Overspeed governor

Installation

* The platform stairlifts can be either floor or wall mounted
* A dedicated single phase power supply adjacent to the lift is required

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is recommended that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.

Request further details from the supplier or contact WorkCover Plant Registration Unit.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

This lift complies with AS1735:7 (information from suppliers website 2010)

Place Of Manufacture

Denmark