Short Description
The Simulflex range of mattress replacement systems are designed to assist pressure reduction. The mattresses have three different zones of horizontally cut foam with smaller cuts on both ends for heel and head comfort. The mattresses are suitable for domestic and hospital environments. Single size only.
Models
* Simulflex Plus (SXP198/086) is a double sided, 4 way turnable mattress with blue cover
* Simulflex (SXS198) is a single sided non turnable mattress with waterfall flap and blue cover
More Details
Structure
* The Simulflex mattress is made from high quality, high density polyurethane foam with integral hinge features to help contour to electric or profiled beds
* It has 3 different zones of horizontally cut foam with smaller cuts on either end designed for support and comfort
* The mattress also comes with a waterfall flap to limit ingress of fluids
* The mattress is single sided and can be rotated. A double sided mattress which can be turned as well as rotated (4 way) is also available.
Cover
* The polyurethane cover is 2 way stretch, vapour permeable, water resistant, anti-static, antimicrobial, bacteriostatic and fungistatic, and has a concealed zip
* It is easy to clean and has clearly marked covers with turn table guide and washing instructions
Factors To Consider
All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (e.g. correct inflation levels), a different product may need to be considered.
Avoid the use of additional covers or pads between the user and the overlay. This may reduce the product's effectiveness.
Ensure that the item is not accidentally placed upside down or back to front. It is advisable to rotate the overlay on a weekly basis, following instructions printed on the mattress cover.
Place Of Manufacture
New Zealand
Standards
The Simulflex mattress has been designed and tested by the Arjo-Huntleigh's research development facility. Simulflex meets all infection control guidelines and fire retardancy regulations.
Fire Retardancy: MR System meets BS EN 597 -1: 1995, BS EN 597 -2: 1995 and BS 6807: 1996, Section 2, Ignition Sources 0,1 and 5 Overlay System meets BS EN 597-1: 1995, BS EN 597 -2: 1995 and BS 6807: 1996, Section 2, Ignition Sources 0,1 and 5 in the top position
Cover Fire Retardancy: Fully enclosing covers fire retardant to BS 7175
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp
