Short Description

The OneWaySlide helps to improve sitting position in chairs and wheelchairs. It resists forward movement whilst allowing backwards sliding. The carer uses accessible draw straps to position the user. It is made of polyester, polyethylene and a special sliding material, Ultra Low Friction (ULF). It is available as an open ended mat or in a tube shape design for more active users.

Method Of Use

Place OneWaySlide so that the open section is facing the back of the wheelchair.

Place the upper section so that it partially sticks up on the backrest of the wheelchair. This makes it easier for the caregiver to reach the handles.

Tie the OneWaySlide to the rear frame tubing of the wheelchair.

1. Positioning is easier if the patient can lean forward. If the patient is unable to lean forward, one caregiver can assist from the front while supporting the patient's balance.

2. If the patient can lean forward and has good balance while seated, only one caregiver is required. Grasp the appropriate handles and pull the patient back by drawing the OneWaySlide upward along the backrest of the wheelchair.

3. If the patient is heavy or if the chair has a high back, two caregivers can assist, one working on either side. Coordinate your efforts.

Raising the patient's feet from the floor will relieve some of the weight of the thighs from the seat, thereby making repositioning easier.

Models

Six models available

OneWaySlide 40, tubular
OneWaySlide 45, tubular
2074 - OneWaySlide 30 (6 handles)
2075 - OneWaySlide 40 (6 handles)
2076 - OneWaySlide 45 (6 handles)
2077 - OneWaySlide 55 (6 handles)

Options

Choice between OneWaySlide with straps or a tubular version.

More Details

* OneWaySlide is used for repositioning further back in a chair or wheelchair
* OneWaySlide is designed to glide easily backward, but not forward
* To make manoeuvring easier for caregivers, OneWaySlide features handles on both sides and at the back. It is placed so that the patient remains sitting on it
* OneWaySlide is available in several sizes
* OneWaySlide is part of a series of different models of transfer assistive devices. The choice of model and material is determined by the patient's functional capacity and the situations in which the product is to be used.

Material
Polyester

Secured by
Draw straps (open ended version only)

Handle position
Six straps include two on each side, two at the base (open ended version only)

Sliding Action
Unidirectional horizontal slide

Method of Movement
Carer pulls on draw straps to position user

Factors To Consider

For safe use, check the condition and function of the product regularly, and always after laundering. Check to ensure that the fabric is not worn, damaged or bleached. If there are signs of wear, the product must be discarded.

Test OneWaySlide's friction by rolling it and noting how easily it glides. If possible, compare with a new OneWaySlide.

Test the seams and strength of the handles by pulling the handles in different directions.

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Place Of Manufacture

Sweden