Short Description
An electrically operated, wooden framed, fully upholstered lounge chair with reclining backrest, elevating legrest and stand up function. It has two way stretch upholstery to provide pressure care. The memory foam seat cushion can be substituted with a Roho or other pressure care cushion The wallsaver feature on the one motor model, allows the chair to be positioned just 80mm from the wall. Available with one or two motors, in mini, medium and maxi sizes.
Options
* Head cushion
* Customise seat and back
* 2 motor options
* Head and arm covers
* Heat and massage unit
* Armrest mounted hand control
* Removable armrest
* Recline only version
* Special fabric order
* Mobile Hospital Base with
* Chrome hand rail
Models
The TopForm Luxor Electric Lift and Recline Chair comes in two models
* TopForm Luxor Platinum in mini, medium and maxi sizes. This model has a removable memory foam cushion that can be replaced with a Roho or other pressure care cushion if required
* TopForm Luxor Optima in mini, medium and maxi sizes. This model has a multi layer foam fixed seat cushion
| Specification |
Maxi Platinum |
Med Platinum |
Mini Platinum |
| Armrest Height (from seat) |
Unknown |
Unknown |
Unknown |
| Backrest Height |
720 mm |
660 mm |
600 mm |
| Backrest Recline Angle |
55 degr from horizontal position (with one motor) |
55 degr from horizontal position (with one motor) |
55 degr from horizontal position (with one motor) |
| Load Capacity (supplier stated) |
140 kg |
140 kg |
140 kg |
| Seat Depth |
550 mm |
Unknown |
470 mm |
| Seat Height |
530 mm |
500 mm |
490 mm |
| Seat Width |
530 mm |
480 mm |
480 mm |
Additional Dimensions
Overall height 1020, 1070 and 1170mm
More Details
Frame
* Wooden Tasmanian oak hardwood and select pine
* The frame is on four castors to allow ease of movement for cleaning
* Optional mobile Hospital Base and chrome hand rail for transportability
Upholstery
* Two way stretch pressure management fabric
* Premium bonded polyester headrest
* Special fabric order if required
Backrest
* Three cushion segmented back configuration. Each segment is individually adjustable to suit individual support needs
* Two x 11 gauge no - sag springs (lumbar and med back)
* Two x 50mm elastic webbing (shoulders)
* One x jute webbing (top back)
Seat
* Memory foam seat cushion. This can be removed and replaced with a Roho or other pressure care cushion where a higher level of pressure care protection is required. Being able to substitute the standard cushion should reduce the likelihood of the seat height being compromised
* Available in Mini, Medium and Maxi size chairs
Armrests
* Padded and upholstered
Legrest
* Is incorporated in the chair, with a chaise and extends from the edge of the seat when in the raised position
* The legrest elevates to a position level to the seat
Controls
* A hand held, soft touch push button control on an extendable cord is standard
* A fabric loop is attached to the cushion. This is used to hold the control in a convenient position. If the loop is not required, it can be tucked under the cushion
* As an option, the hand control can be recessed into the armrest
Action of the chair
One Motor
* The one motor chair has the WALL SAVER mechanism. This not only allows the chair to be placed close to the wall, but also has the feature that the footrest raises and not until it is fully raised does the back start to recline. This allows the user to remain sitting upright with their legs elevated if desired.)
* The back reclines to about 55 degrees from horizontal
Two Motors
* On the two motor chair the back and footrest are controlled independently, and goes completely flat. If required,the feet can be elevated above the heart
Power
* Mains powered
* Two x 9 volt batteries provide battery backup (this supplies approx four chair adjustments then batteries must be replaced)
Customisation
* Seat width, seat height, back height and back thickness can be customised
Standards
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards
TGA
Many of the items on the ILC NSW website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au
When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.
Place Of Manufacture
Tas, Australia
