Short Description

This system allows an existing two tap system to be converted to a single lever mixer tap. The system is installed over the existing tapware, and can be easily removed if required. The lever tap is available in two sizes. Suitable for domestic use and for bathroom, shower or laundry tap systems or any situation where dual taps required conversion to a single lever tap. It can be used with a thermostatic shower mixer for temperature control.

Method Of Use

The single lever mixer is available in a choice of long or short levers. The water temperature is adjusted by horizontal movement of the lever, and the rate of water flow, by vertical movement of the lever.

Models

Mixermate is available
* With or without a hand held shower
* In combination with Mattsson Thermostatic/Pressure Balance Shower Mixer with or without hand held Shower and Cradle
* With Ram Drill free shower and rail in chrome

* Lever is available in white, ivory or chrome
* Lever is available in two basin lengths

More Details

Materials
* Cover fabricated from stainless steel
* The hand shower (Genoa brand) is available with or without the rail

Type
Single solid lever mixer tap only. Available in two lengths

Finish
Available in plastic and stainless steel at an extra cost

Method of Fixing
The system is installed at the same level as the existing tapware

Output
As the mixer can be preset to the right temperature, it negates the need to waste water trying to achieve the optimum temperature. In addition to this, the shower heads that come with the mixer mate system are AAA rated at 9 litres per minute.

Operation
Temperature is adjusted by horizontal movement of the lever, rate of water flow is adjusted by vertical movement of the lever.

Application
* Suitable for bathroom, shower or laundry tap systems or any situation where dual taps required conversion to a single lever tap
* The system is installed to the outside of the shower recess wall without having to remove tiles or part of the wall
* The cover doubles as a shelf for soaps, shampoos, etc and is available in white or almond-ivory to suit most bathrooms.

Installation

The system is installed over the existing tapware. No internal work is required. The existing tapware is removed and the mixer system is installed externally over the tapware.

Installation is required to be completed by a registered plumber.

Maintenance

* No internal work required for installation or repairs
* Unit can be easily removed

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Manufacturer reports all components of the Mixer-Mate meet Australian Standards (AS3688) and all tapware is Wels approved.
Licence no. 1061

Place Of Manufacture

Australia