More Details

Vibralarm Function
When the smoke alarm is set off, the strobe light will flash several times and the plug-in vibrating pad, which is designed to sit under the pillow, will begin to vibrate.

Features
The Vibralarm is mains powered, but features a lead-acid rechargeable battery that provides back-up power in the event of a mains failure.

The Vibralarm features the following lights on the front of the system;
* A green light indicates that mains power is connected, when mains power is absent, it will flash every four seconds.
* If mains power fails, a red light will flash once every second to indicate it is running on the battery back-up.
* An amber light will be present if there is a fault in the control unit.

The system also features a test button on the front of the unit, that allows the strobe light, vibration pad and smoke alarm to be tested.

Smoke alarms
* The Vibralarm is designed for use with Brooks smoke alarms, including options of a mains powered photoelectric alarm or a 10 year lithium cell, battery powered photoelectric alarm.
* The smoke alarms require RadioLINK interconnectivity to allow the Vibralarm to link wirelessly to the alarm. This is achieved through use of a RF RadioLINK Module installed into the 10 year lithium cell, battery-powered photoelectric alarm, or through use of a RadioLINK base for use with the mains powered alarm.

NSW Smoke Alarm Subsidy Scheme
The EIB170RF is commonly sold as a kit with the EIB605TYCRF smoke alarm. This compact alarm has a large easy to locate test/hush button. This kit is available through the Deaf Society NSW under the NSW Smoke Alarm Subsidy Scheme.

Place Of Manufacture

Ireland

Price Guide

Price is from Schnap Electric Products

Models

Only one model available.

Suitable for use with the following Smoke Alarms:
* EIB146 Brooks 230V Mains Powered Photoelectric with Hush, with EIB168RF Brooks RadioLINK base
* EIB605TYCRF Brooks 10 Year Lithium Cell Battery Powered Photoelectric Smoke Alarm with RadioLINK Interconnectivity

Installation

The system is designed for self-installation.

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.