Browse Products: Lights and Light Controls

A sensor light globe that fits into a standard light fitting. It is activated by movement or sound and can detect when someone is in the room. It will remain on until the last person leaves the room.

A compact lamp fitted with a Beon light Sensor that detects a person entering a room and automatically turns on. The lamp adjusts in a left or right direction and has adjustable timing setttings. It can be used indoors and outdoors. The globe is not included.

The PIR tube will detect movement, turn on and stay on for the set duration of time, and then turn off. Night lux is fitted therefore it will not activate during the day or in well lit areas. The tube is available in two sizes and wattage. It can be retrofitted to existing fittings.

An infrared motion activated sensor light. It attaches to a standard light socket and enables a lamp, floodlight, ceiling or wall mounted light to operate as a sensor light. The sensor mechanism can be adjusted up and down in angle to position its infrared motion detector where required. It plugs into a standard light socket for indoor or outdoor use, and uses the standard light's power source. The timer operation can be from one to twelve minutes using a dial mechanism.

A sensor night light that is plugged into a wall and is illuminated in a half circle shape. It is available in LED light. It automatically turns on at dusk and turns off at dawn.

Light switch covers containing photo luminous pigments to enable them to glow in the dark. They come with double sided adhesive tape for temporary fitting to the light switch. A more permanent attachment can be effected with contact adhesive. Suitable for indoor and outdoor use. Two models are available.

A range of sensor and motion detector switches which can be used within the home. Sensors are designed for indoor use. Wiring is required to install the initial driver, from which multiple sensor switches can be connected.

A mains powered task light lamp with a counterbalanced double arm that extends to over 1000mm. The light head rotates 90 degrees. A patent refractive lens and inbuilt dimmer reduce glare and shadowing. it can be clamped to the surface, free standing or mounted to a panel, slat wall, beam or tool rail.