Short Description
A multi optioned rigid frame self propelled wheelchair with a V-shaped, rigid, one piece legrest which makes the wheelchair more compact at the front and allows closer access to objects. It has a standard 70 degree front frame (hanger) bend.
Options
* Tyre and castor choices.
* Frame colours
* Black or silver chair parts
* Choice of seat width, depth, frame height
* Cushion height choice 50, 75 or 100mm.
* Backrest fixed, non folding or folding, adjustable 280mm - 360mm,
310mm - 410mm, 410mm - 460mm
* Push handles
* Adjustable upholstery
* Fixed or flip up footrest platform
* Plastic or neoprene impact guards
* Footrest extension tubes in short, medium, long and high-mount.
* Castors - 75mm micros
125mm polyurethane
* 150mm pneumatic or polyurethane
* Aluminium castor rim
* 20mm or 40mm longer fork stem bolt
* Multi positioning castor plate
* Castor pin locks
* Quick release castor stems
* Armrests: Padded swing away; height adjustable with standard
or full length pad in adult and kids.
* Stroller handles
* Amputee axle plate
* Titanium axles
* Quad release axle nuts
* Anti-tip tubes
* Mag or spoke rear wheels
* Tennis, basketball tyres (with/without heat treatment)
* 560, 610 and 660mm tyres
* Tyres - pneumatic, full / low profile, polyurethane, kevlar,
high pressure clincher, latex tubular, turbo tread.
* Aluminium or plastic coated handrim.
* Vertical or oblique projections.
* Wheel locks: high push / pull / scissor.
* Grade aids.
* Low 150 or 230mm extended handles.
| Specification |
Standard |
| Armrest Height (from seat) |
Unknown |
| Backrest Height |
From 200 mm to 510 mm |
| Legrest Length |
Unknown |
| Load Capacity (supplier stated) |
Unknown |
| Seat Depth |
From 360 mm to 460 mm |
| Seat Width |
From 300 mm to 510 mm |
| Weight (kg) |
From 9 kg to 9.8 kg |
Additional Dimensions
Width NSW......................................... From 580 mm to 790 mm
Wheel Diameter (Rear)............................. From 560 mm to 660 mm
Castor Width...................................... From 75 mm to 150 mm
More Details
Frame
Aluminium
Upholstery
* Sail cloth seat sling.
* Para-pack back upholstery.
Seat
* Widths 300mm - 510mm in 25mm increments.
* Depths 360mm - 460mm in 25mm increments.
* Front seat height approximately 450mm depending on castor size.
* Choice of 50, 75 or 100mm cushion.
Backrest
*Non-folding
* Fixed is standard 200mm - 460mm in 25mm increments.
Armrests
Not standard (see options)
Footrest
* Rigid with legstrap.
* Short, medium or long footrest extension tubes are optional.
Rear Wheels
* Quick release
* Axle plate allows vertical and horizontal wheel position adjustment.
Spoke. Stainless steel axles. 610mm pneumatic tyres.
Aluminium hand rims.
Castors
125mm polyurethane
Wheel Locks
Low mount
Dismantle
Remove rear wheels
Factors To Consider
Wheelchair Restraints
When transporting a person in a wheelchair in a car or van, both the occupant and the wheelchair require an RTA approved restraint system. The wheelchair and the occupant need to be separately secured to the vehicle itself.
RTA approval is not required for a postural support, such as a harness, that supports the user in the wheelchair but is not part of the vehicle restraint system.
The use of a headrest is not legally required but strongly recommended. Easily detachable, folding headrests which fit a wheelchair with standard push handles are available. Refer to section Wheelchair, Scooter, Cushions, ramps / Postural Supports - Seating System: Restraint+ Head+Back+Seats
Place Of Manufacture
Sunrise Medical (USA)
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
subscribers
