Short Description
A rear wheel drive battery powered wheelchair with suspension. It features a TrueTrack system which facilitates control of the chair. It meets a wide range of user needs with seat sizes ranging from 305mm to 610mm. Available with a range of seat and switch options. Tilt in space and / or reclining backrest is optional.
Options
. 4 pole heavy duty motors with free wheeling (control on wheel hubs)
. Electronic Options: MKIV-A with switch options including pneumatic, microswitch and ECU.
. Quad link retractable mount
. ASBA seat with powered tilt in space and / or reclining backrest
. Manually reclining backrest
. Casters: Standard: 200mm x 55mm semi pneumatic
Optional: 200mm x 55mm pneumatic or 230mm x 75mm pneumatic and foam filled
. Caster Suspension: Pneumatic and semi pneumatic 200mm
. Drive Wheels: Standard: pneumatic 355mm x 75mm
Optional: foam filled 355mm x 75mm
pneumatic & foam filled 355mm x 100mm
free wheel hub w/ HD 4-pole motor (355mm x 100mm adds 50mm to overall width)
. Powered elevating legrests
| Specification |
Standard |
| Armrest Height (from seat) |
From 240 mm to 340 mm |
| Backrest Height |
From 460 mm to 660 mm (in 50m increments) |
| Load Capacity (supplier stated) |
113 or 136 kg (see Additional Dimensions) |
| Seat Depth |
From 305 mm to 560 mm (in 25mm increments) |
| Seat Height |
440, 500 or 535 mm |
| Seat Width |
From 305 mm to 610 mm (in 25mm increments) |
| Width |
Unknown |
Additional Dimensions
Overall length: Short base: 720mm
Long base: 800mm (Measured from head tube to standard anti tip wheel)
Seat to floor Hgt: Low: 440mm
Medium: 500mm
Tall: 535mm
Seat Tilt: 0 - 10 (continuous adjustment)
Armrest height: Fixed: 250mm
Adjustable: 240 - 340mm
Back Angle: 80 - 115 (5: increments)
Overall Weight: 86kg (without batteries)
Load capacity: Standard: GB True Track motor -136kg (w/ tilt/recline 113kg)
Optional: HD 4-pole pkg - 181kg (w/ tilt/recline 159kg)
Rear wheel dia: 355mm x 75mm
Castor diameter: 200mm x 55mm (standard)
Caster Options: Standard: 200mm x 55mm semi-pneumatic Optional: 200mm x 55mm pneumatic Optional: 230mm x 75mm pneumatic and foam filled
Caster Suspension Options: Pneumatic & semi pneumatic: 200mm
Drive Wheel Options: Standard: pneumatic 355mm x 75mm Optional: foam-filled 355mm x 75mm Optional: pneumatic & foam-filled 355mm x 100mm Optional: free-wheel hub w/ HD 4-pole motor (355mm x 100mm adds 50mm to overall width)
Electronic Options: MKIV-A with switch options
Speed: Standard: GB w/TrueTrack motor 14km/hr (max) Optional: HD 4-pole motor 7 km/hr (max)
Battery: Group 24
More Details
Frame: Powder coated steel in black, pewter, red or yellow. 2 x seat options depending on support required.
. Seat depth and backrest height are adjustable allowing for growth of user.
. Rear wheel drive allows better performance outdoors.
Seats:
. 2 x seat options depending on support required.
- ASBA Seat: (standard) adjustable seat with optional tilt in space and/or reclining back
- Van style captain seat which can be semi reclining or fully reclining
Upholstery: synthetic (nylon or vinyl)
Backrest: Recliner back available in 460mm to 660mm (in 50mm increments)
Controls:
. Inductive, proportional joystick standard. . Range of switch options.
. May be mounted on right or left side of chair.
. Flick switches for speed and power on/off.
. Quad link retractable mount may be used with this chair to allow a closer approach to tables and desks.
Batteries:
. Dual mode charger standard for both deep cycle sealed gel and lead acid batteries.
. 2 x 12 volt batteries.
Wheels:
. 250 mm x 80 mm pneumatic front castors.
. 300 mm x 80 mm pneumatic rear wheels combined with a pivoting front end suspension.
Legrests: Choice of swing away with quad release or swingaway elevating.
Backrest:
. Height adjustable from 355mm - 457mm in sling seat style.
. 508mm in height for position upholstery seat.
Disassembly: May be disassembled into several components including armrests, legrests, batteries, front castors and seat.
Other features:
. Automatic correction circuits (ACC) help maintain speed, direction and safe control.
. Automatic braking.
. LED fuel indicator displays battery charge level.
. Indoor/outdoor mode options at the flick of a switch.
. Reverse polarity protection against incorrect battery hookup.
. Choice of pram or standard push handles.
Switch options:
. Pneumatic switch for breath operations.
. Attendant control.
. Driver operated reclining backrest switch.
. Compatible ECU switching systems are available: these offer wafer boards, miniature short throw joysticks, menu driven ECU and many other options.
For a comprehensive list of options please refer to the Invacare catalogue.
Place Of Manufacture
Invacare (USA)
Licence & Insurance Requirements
Registration requirements
In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.
Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.
subscribers 
