Short Description
This lift has been designed for lifting people from their wheelchair into a car and out again. The mounting post can be fitted to enable the lift to be used on the passenger or drivers side. It can be operated by a helper or the user by use of a small control box on a flying lead. Once the person has been lifted, the horizontal movements into and out of the car are done manually.
More Details
* There are only 2 switches, one for On/Off, the other for Up/Down.
* The control box can be held or positioned on the lift using velcro.
* Three sizes of sling are available and have a 4 point keyhole shaped connector.
* The mounting post is the only fixture to the vehicle, it can be removed and used on another vehicle.
* A double joint is available to extend the mounting post further out from the dashboard for easier access.
* Another mounting bracket can be fitted in the persons home to enable the lift to be also used indoors.
* This can be more difficult to use on the driver's side due to the driving controls creating an obstacle.
* There are 3 separate pivot points along the lifting arm which allows the
person being lifted to be manoeuvred easily into the car.
* Suitable for 2 door cars or 4 door cars from Camry size and upwards.
* Power is supplied from the vehicles 12 volt battery.
Place Of Manufacture
United Kingdom
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp
subscribers 
