Short Description

An automatic door operator designed for domestic use or use in healthcare facility health care facilities. It operates by remote control on swing doors to unlock, open and close the door. The system includes an electric strike locking device and a push button remote control key fob actuator.

Models

One model is available

More Details

. A surface mounted electrically operated door operator that can be retrofitted to existing swing doors.
. The system can be programmed to unlock the door and open it as well as close it and lock the door, if required, after a specified time delay.
. Keyed access and manual operation remains intact
. Remote control range is approx 25 - 30 metres. Large button operation. A velcro strap allows remote to be mounted anywhere for convenience.
. Door stops on obstruction

The system includes:
. Motor / gearbox attached to mounting bracket
. Door arm assembly with patented slider bracket
. Microprocessor Controller
. Plug - in Power Adapter Transformer
. Key FOB Transmitter with hook & loop (velcro) strap
. Electric Strike assembly and wiring
. Door Operator assembly cover
. Emergency disconnect handle
. Junction box with advanced radio frequency module

Installation

The system must be installed by a qualified electrician

Place Of Manufacture

Stanley Access Technologies (USA)

Standards

For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Australian Standard(s).

For public buildings and any facility which must comply with AS1428.1.
The Australian standard AS1428.1 - "Design for access and mobility, Part 1: General requirements for access - New building work" includes requirements for door closers to ensure that the door is easy to open manually against the force of the door closer.(Clause 11.1.1(c)) In the case of doors which are powered in their closing AND opening these requirements should automatically be fulfilled.

AS1428.1 includes requirements to ensure that the manual controls on automatic doors are accessible: Clause 11.1.2 (e)
"Manual controls to power-operated doors shall be positioned above a level surface not closer than 1000mm from the arc of a hinged door or clear of a sliding door in the open position, and the door shall remain open for a sufficient period to enable a person with impaired mobility to pass safely through the doorway."

Other relevant Australian Standards
AS4985 - Automatic Sliding Door Assemblies
AS4178 - Electromagnetic door holders.