Short Description

An electrically operated bed, with adjustable backrest, leg raise, tilting (Trendelenburg) and bed height adjustment. Available in single bed size only. It dismantles and has clearance for mobile hoists under the bed. Lowest height is 330mm.

Options

- Self help pole (Lifting Pole) (Model 100503) with load capacity of 65kg
- IV pole
- Removable safety sides (Model 100506 Standard and Model 100507 Extra High)
- Flexible handset holder with attachment clamp (Model 100505)
- Mobile storage stand (Model 100504)
- Foam mattress with two way stretch cover (Model 100501)

Models

Model 100500 - Four section, tilt, height adjustable, backrest raise, electric leg raise with manual knee break
Model 100510 - Four section, height adjustable, backrest raise, electric leg raise with manual knee break
Model 100520 - Two section, tilt, height adjustable, backrest raise, manual leg elevation without knee break
Model 100530 - Two section, height adjustable, backrest raise, manual leg elevation without knee break
Model 100535 - Flat deck (single section), tilt, height adjustable
Model 100540 - Flat deck (single section), height adjustable
Model 100550 - Four section, tilt, height adjustable, backrest raise, electric leg raise with manual knee break, built in wooden safety sides
Model 100560 - Four section, height adjustable, backrest raise, electric leg raise with manual knee break, built in wooden safety sides
Model 100570 - Two section, tilt, height adjustable, backrest raise, manual leg elevation without knee break, built in wooden safety sides
Model 100580 - Two section, height adjustable, backrest raise, manual leg elevation without knee break, built in wooden safety sides
Model 100585 - Flat deck (single section), tilt, height adjustable, built in wooden safety sides
Model 100590 - Flat deck (single section), height adjustable, built in wooden safety sides
Non standard models

Additional Dimensions

Standard Minuet
Model 100520

Leg elevation.....................................0 to 15 degrees
Backrest angle..................................0 to 70 degrees
Tilt angle............................................-10 degrees to +10 degrees

Model 100530
Leg elevation.....................................0 to 15 degrees
Backrest angle..................................0 to 70 degrees

Model 100500
Leg elevation.....................................0 to 18 degrees
Backrest angle..................................0 to 70 degrees
Tilt angle............................................-10 degrees to +10 degrees

Model 100510
Leg elevation.....................................0 to 18 degrees
Backrest angle..................................0 to 70 degrees

Model 100550
Leg elevation.....................................0 to 18 degrees
Backrest angle..................................0 to 70 degrees
Tilt angle............................................-10 degrees to +10 degrees

Model 100560
Leg elevation.....................................0 to 18 degrees
Backrest angle..................................0 to 70 degrees

More Details

All metal work is coated in a durable, nylon polyester finish.

Cleaning Requirements
Before cleaning, disconnect the bed from the mains power supply.
All surfaces can be cleaned by wiping with a soft cloth moistened with hot water and a mild detergent. Avoid splashing the actuators and hand set. Rinse with a cloth moistened with clean water and dry.
Hypocarbonate or phenol based cleaning agents should not be used.

Factors To Consider

The tilt facility, when fitted, should only be used with the guidance of a clinically qualified person.

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Place Of Manufacture

Huntleigh Healthcare Ltd (UK)