Short Description
A range of battery operated movement detectors.
Models
DIY Security Alarm (Wall Mount)
Passive Infra-red (PIR) alarm. Detection area has a scan angle of 110 degrees and a range of 10 metres (approx). Can be used as a portable alarm or be wall mounted for semi permanent surveillance. Simply arm and disarm by pressing a small infra red remote control unit, fitted with a key ring. (2 remotes supplied). Exit / Entry time delays (8 seconds) avoids false alarms. In built 105 dB siren alarm. Includes magnetic contact reed switch and wiring for door or window security. Takes 3 x AA size batteries (not included). Includes button cell batteries for transmitter ON/OFF switches. Can be powered using 240 volt plug-in adaptor (not included). Reset time- approx 1 minute.
AM115 Mini Window and Door Alarm
Self contained protection alarm, sounds when window or door is opened. . Ultra loud 130dB piezo alarm. Install with double sided self adhesive tape (included). Fits door frames, window frames or sliding doors. Slide switch to arm / disarm alarm. Batteries supplied.
AM360 DIY Security Alarm (Ceiling Mount)
provides permanent surveillance of any room. Easy operation with remote control ON/OFF switch with key ring attached. (2 remote controls supplied). Powered by 3 x C size batteries (not included). Infra-red remote controls requires 2 x 1.5 volt button cells (supplied).
AM471 Security Beam
Buzzer sounds when infra-red beam is broken. Range of 2-8 metres. Low voltage operation 9 volt. Adaptor plugs directly into regular household power point and reduces the voltage to a safe, low 9 volt.
AM490 Compact Entry Detector
Infra-red sensor technology. 10 metre range with 130 detection angle. Can be installed horizontally, vertically or placed on a desk or counter. Push button door bell can be connected (not supplied). Uses standard 9 volt battery (not supplied).
AM551 Wireless Movement Activated Sensor
Provides increased protection when used in conjunction with the Arlec Wireless Home Security Alarm System (AM500). Detects motion within an 8 metre radius of the sensor. Covers a wide area of up to 120. Requires 1 X 9 volt battery (not supplied). Red LED on the front of the unit lights when movement is detected. The main control panel is alerted which triggers the alarm.
AM552 Wireless Window / Door Sensor
Provides increased protection when used in conjunction with the Arlec AM500 Wireless Home Security Alarm System. A red LED on the front of the unit lights when movement is detected. The main control panel is alerted which triggers the alarm. Powered by 1 X 12 volt battery (supplied).
AM553 Compact Extension Siren
Sounds 110dB piezo siren. Accessory to the Arlec Wireless Home Security Alarms (AM500) and Home Security Alarm (AM400) as an outdoor siren.
More Details
* These detectors may also be used to alert carers of people who are inclined to wander because of dementia or other conditions
* The system is not selective and the sensor will be activated by anyone (or anything) who passes within range or who opens a door with a sensor attached
* Careful consideration should be given to where the units are positioned so that accidental activation is minimised
Installation
Do It Yourself installation
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation