Short Description

A removable barrier which fits on most kitchen benches, cooktops or tables. It blocks access to hot food etc, preventing scalds and slippery floors. The device is made from high strength aluminium and high density polyethylene. It comes with pre applied high quality double sided adhesive tape. Available in three lengths. Length can also be customised.

Models

One model is available in three lengths - 1000mm; 1500mm; 2000mm.

More Details

FUNCTION
It prevents liquids and foods from falling off the bench edge. This helps prevent scald burns and minimises slippery floors.

MATERIALS :
Edgepiece: High strength aluminium
Fencepiece: High density polyethylene
Coverpiece: Rubberised plastic

COLOURS :
Edgepiece: white or anodized silver
Fencepiece: white only

COMPONENTS :
1. An edgepiece which is made from aluminium and adheres to the bench edge using a very strong double sided tape.
2. A fencepiece which is made from high density polyethylene. The fencepiece is positioned in the edgepiece to create the safety barrier. It can be easily removed when not in use.
3. A coverpiece which is made from rubberised plastic. The coverpiece is for optional use in the edgepiece when the fencepiece has been removed. Prevents food collecting in the edgepiece.
4. Pre-applied adhesive tape
5. Installation instructions

Installation

Step 1
Thoroughly clean along bench edge. Remove all grease and/or surface polishes. Finally wipe with an alcohol based cleaner and allow to dry.

Step 2
Remove adhesive tape backing strip from the edgepiece and press the edgepiece firmly into place on the benchtop edge. Clamp into place overnight.

Step 3
Fit the coverpiece or fencepiece to the edgepiece slot. Installation is now complete.

COMMENTS :
. Can be cut to length using a sharp knife and a metal blade hacksaw. Cut edges should be lightly filed until smooth.
. Can be fitted around corners

Standards

For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).

Place Of Manufacture

Qld, Australia