Short Description
A steel framed, battery operated stand up hoist with a keyhole fitting. It is designed to bring the occupant from sitting to a supported standing position. Suitable for use in domestic and healthcare facility settings. The load capacity is 200 kg. Optional transfer seat and walking tutor (two sizes).
Options
* Transfer Seat - One size. 75220B Removable transport seat holds the occupant with comfort and safety while waiting or for extended transfers.
* Walking Tutor - Standard WT200 Enables the lifter to be used as a rehabilitation walker.
* Walking Tutor - Narrow WT127
Models
Reliant RPS44OEE - Code 732
Reliant Stand Up Sling - Code 783
Reliant Transport Sling - Code 784
| Specification |
Standard |
| Base Height (clearance) |
125 mm |
| Base Length |
1150 mm |
| Base Width Maximum (int measurement open) |
1215 mm |
| Base Width Minimum (ext measurement closed) |
665 mm |
| Height |
Unknown (storage height 1170mm) |
| Load Capacity (supplier stated) |
200 kg |
Additional Dimensions
Weight (kg) NSW................................... 52.4 kg
Spreader Bar Height NSW........................... From 1065 mm to 1719 mm
More Details
It is for use with weight bearing and fully dependent people and those needing rehabilitation support.
Features
Frame Powder coated steel frame with a single angled mast.
Push Handle A U shaped push handle is located on the upper part of the mast.
Spreader Bar Two bars with keyhole attachment points.
Base U shaped base which is adjustable in width by a manual lever.
FootplateThe footplate is square with a slip resistant upper surface and raised edge.
Knee Pad The knee pad is foam padded and vinyl upholstered with a contoured surface to accommodate the shins / knees.
Slings are provided in the following styles:
Two point Universal Stand Up Sling with hook and loop or buckle closure.
A four point leg support sling
Castors are swivel style. Single 100mm diameter castors on the front and rear with step on brakes on the rear.
Powered Controls are hand held on an extendable cord. A hook attachment on the control unit allows the controls to be placed over the push handle.
Power Source is through a battery that is mounted on the rear of the mast.
Battery Recharging is achieved by connecting the hoist to the supplied separate battery charger which is then plugged into mains power. This requires the hoist to be stored with access to a power point.
Method of Use
This stand up hoist is designed to assist with the standing transfer of a person from one seated position to another seated position. The person needs to have the ability to weight bear, excepting where a four point sling is to be used.
The use of the under arm torso sling, weight bearing footplate and a cushioned, contoured knee pad provide the three points of support. It is preferable if the person can hold onto the hand grips to assist the standing process. The person needs to be able to lean back into the sling for it to be effective.
This style of hoist is useful for toiletting and dressing tasks as it provides full access for attending to lower garments.
Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Place Of Manufacture
Invacare (Australia)
subscribers 
