Short Description

A battery operated wheelchair platform lift allowing straight or curved run access from one level to another travelling at the same gradient and location as existing stairs or ramps. Suitable for up to five metres of travel and indoor and outdoor use. The track is floor mounted directly to the stairs. Options are available. Can be customised.

Options

Tracking type: curved straight or both

Models

One model available with option for either indoor or outdoor use

More Details

OPERATION
battery operated - electrically charged mechanical friction rack and pinion drive type

METHOD OF LIFT OPERATION
constant pressure control buttons or remote control

TRACK MOUNTING
attached directly to the stair treads

POSITION OF SWITCH
control unit on flexible cord as well as two remote control units

ARMRESTS
lift up

FOOTREST
slip resistant covering

SEAT
standing or wheelchair access

SAFETY FEATURES
safety ramps, speed governor

APPLICATION
indoors / outdoors for straight run and turning stairs or ramps

Installation

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is recommended that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.

Request further details from the supplier or contact WorkCover Plant Registration Unit.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

The supplier states that this lift is fully compliant with AS 1735 Part 7

Place Of Manufacture

Italy