Short Description

Freelift manufactures mains powered battery operated stairlifts for straight and curved staircases. The stairlift is custom made to suit the installation. The curved stairlift can be installed on either the inside or outside bend of the staircase. It runs on a single, compact tubular rail that fixes directly to the staircase. Suitable for indoor use. Optional 90 and 180 degree parking top and bottom.

Options

Extended rail
90 or 180 bend in rail at top or bottom of stairs for parking the chair
Extra charging point
Autoswivel - use joystick to operate automatic seat swivel
Automatic hinged rail The hinge on Freelift's curved rail is a fully automatic operation.

Models

STRAIGHT STAIRLIFT
Mondriaan - compact. The wear resistant narrow rail is cream coloured.
When folded the Mondriaan takes up only 320mm of space

CURVED STAIRLIFTS

Van Gogh
The Van Gogh is fitted to the outside of the staircase. Suitable for curves or corners. The single tubular rail is available in cream, brown and grey.

Rembrandt
Fitted to the inside of the staircase. Suitable for stairs and stairwells, because it leaves a maximum amount of space on the path.
The single tubular rail is available in cream, brown and grey.

Vermeer
A multi storey stairlift. The Vermeer is usually fitted to the inside of the stairs, sometimes the outside. In principle, it is identical to the Rembrandt and the Van Gogh in terms of technique, appearance and materials

CHAIRS
Five different seats, each of them available in a range of colours.

The Classic seat
Fully synthetic (polyurethane) chair in leather grain design
Fold up seat, armrests and footrest (individually folding)
Fully automatic auto swivel

The Select seat
Fully fabric chair
Fold up seat, armrests and footrest (individually folding)

The Basic
Fully fabric chair
Fold up seat, armrests and footrest in one movement

The Comfort seat
It has a self lifting feature, which enables users to be easily lifted to their feet, or safely lowered into a seated position.
Fold up seat, armrests and footrest. Footrest can be separately operated by a handle.

Panda seat
Specially designed for children up to 9 years of age. It comes complete with a 5 point safety harness and an adjustable footplate.

More Details

All Freelift stairlifts are compact and unobtrusive and leave adequate space for other stair users

CHAIRS
All models feature:
Can be operated from left or right side
Load capacity 125kg
Swivel chair
Joystick operation
Range of colours
Seat belt

RAILS
The drop nose feature is a rail ending, which comes as standard. It is
used when the area at the bottom of the stairs is very limited and a normal rail ending may cause a tripping hazard or a door or opening is close by. The rail finishes close to the bottom step.

SAFETY
Obstacle sensors - the Freelift will stop immediately when it encounters an obstacle on the stairs
Lift can still be operated a "few times" during a power cut
Buckled seat belt on each chair

CONTROLS
Joystick and key on/off are located on front surface of either the left or right armrest.
Fetch and dispatch buttons at top or bottom of stairs are standard.

Installation

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. There is no fee for a stairlift installed in a private residence for use by a person with a disability. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is recommended that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.

Request further details from the supplier or contact WorkCover Plant Registration Unit.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Freelift (Holland)