Short Description

Latham tactile indicator studs are available in stainless steel and brass, either with Latham Supagrit Silicone Carbide slip resistant mineral inserts or full metal with Spiral Top (stainless steel only). Suitable for indoor and outdoor applications. Designed in accordance with AS 1428.4-2002.

Models

LTAS Tactile indicator Stud
Slip resistant abrasive stainless steel stud with Supagrit Silicone Carbide Mineral insert

LTSS Tactile indicator Stud
Spiral top stainless steel

LTAB Tactile indicator Stud
Slip resistant abrasive brass stud with Supagrit Silicone Carbide Mineral insert

More Details

The Studs are designed for applications where rubber and concrete based tactile tiles may not be suitable.
They are a more visually attractive alternative to rubber or concrete based products.

APPLICATIONS include
Hotels, office buildings, museums, shopping centres, hospitals etc

COLOURS
Choice of infill colours

Factors To Consider

NOTE: The manufacturer does NOT recommend the use of Latham tactile Indicator Studs in carpet applications due to the possibility of trip hazards caused by the settling of carpet fibre.

Installation

The Studs can be installed in tiles, marble, granite, terrazzo, concrete, vinyl, timber and most solid flooring surfaces.

All studs should be installed into correctly drilled holes using Latham Thixotropic Stud Adhesive. All studs need to be installed in accordance with AS 1428.4-2002 where applicable.

The Building Code of Australia specifies in what situations TGSI must be installed. To comply with the BCA the installation must be in full compliance with the relevant sections of the current AS1428.4. Tactile ground surface indicators for the orientation of people with vision impairment. This standard provides specifications on the form of TGSI and on their installation. Refer to this standard to determine the luminance contrast required between the TGSI and the surrounding ground surface and for installation details including width, length and location for a wide range of applications

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Australia