Short Description
A powered (mains or battery) inflatable bath hoist, which is positioned within the bath. It allows the occupant to lower themselves from the top of the bath into the bath water via a hand held controller. This hoist raises the user up to 400mm. It can be folded and is portable. Suitable for domestic use. A model that lifts up to 500mm is available as a special order.
Models
* Mangar Bathing Cushion 400 (max. seat height 400mm)
* Mangar Bathing Cushion 500 (max. seat height 500mm)
Options
Carry bag
| Specification |
Standard |
| Boom Length |
N/A |
| Boom Rotation |
N/A |
| Load Capacity (supplier stated) |
150 kg |
| Seat Depth |
440 mm |
| Seat Height |
From 20 mm to 400 mm (from deflated to inflated) |
| Seat Width |
580 mm |
Additional Dimensions
Backrest width 540 mm
Backrest depth 330 mm
Airhose length 1.8 m
Weight of Cushion 2 kg
More Details
. The Comfort Bather has four suction cap feet on the base to attach it to the surface of the bath.
. It fits standard bathtubs with a width of 585mm
. It operates with low air pressure and fully inflates in about 3 minutes. It deflates gently with weight on it. It will lose air slowly if left to deflate after use.
. Hoist has lumbar support which can fold flat to allow complete submersion in the water
. The air compressor will not allow the unit to be deflated unless there is enough charge for it to be inflated again (preventing the user from being stuck in the tub unexpectedly).
. The air compressor will inflate the unit up to 3 times on one charge
Factors To Consider
. The Comfort Bather Bath Lift is best suited for someone with reasonable upper body stability
. Most Mangar inflatable bathers raise the user to a height of 400mm. This product is available for people who have a higher bath and / or need to raise to a height of 500mm
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Place Of Manufacture
United Kingdom
subscribers 
