Short Description

This compact, portable, folding four wheeled scooter is rear wheel drive. It features finger operated controls and an upholstered seat with fold down backrest. The scooter can be folded together as one unit including the seat. It can then be pulled along on two wheels. Seat and battery are removable to facilitate transport. The scooter comes with a folding front basket.

Models

A three wheel model is available.

Additional Dimensions

Height..............850 mm

More Details

The scooter has a Lithium Ion Phosphate Battery that has a charge indicator and can be locked in place. The scooter is turned on initially at the battery and then on the tiller.

FRAME Steel frame. Plastic covers are available in red or grey.

SEAT does not swivel, is removable

STEERING COLUMN can be tilt adjusted by a lever at the base of the column.

FRONT WHEELS 200mm solid tyres

REAR WHEELS 200mm solid tyres

CONTROLS The control panel features a horn, battery charge indicator and speed dial. The

BATTERY CHARGING is achieved by connecting the scooter from the rear charger inlet to a mains power point, off board battery charger.

BATTERY 10amp Lithium Ion Phosphate Battery with built in main switch and charger port. There is a battery indicator on the steering column

FOOTREST is a plastic platform

BRAKES are electromagnetic

SAFETY FEATURES include:
- Reversing Beeper - a beeper sounds when the scooter is being reversed
- Rear anti tip wheels

TRANSPORTING
Seat back and base covers are removable. The scooter can be folded with the seat in place, or the seat can be removed to reduce the weight.

The scooter can be dismantled into four parts:
1.Battery
Remove the battery by unlocking the release button, depressing it, and sliding the battery across.
2.Seat
Remove and fold the seat. Pins are removed at the rear of the seat allowing the chair to be lifted out of the base. Alternatively the seat can be folded onto the scooter base by lifting the rear handle and bringing forward.
4. Basket
The basket folds by lifting the base up and folding the sides inwards. There is a clip to secure it to the tiller.

Factors To Consider

This item should be trialled in the users home environment to ensure maximum safety/independence. Environmental considerations include kerbs, footpaths, road / railway crossings, etc

Overall length.......1100mm
Overall width........580mm
The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.

State transit will only carry scooters with an unladen weight of less than 200 kg and which can be driven onto the bus, and manoeuvred to fit wholly within the designated wheelchair space under their own power. Any such scooters carried must also comply where relevant with the rules applying to wheelchairs.

Three wheeled mobility aids of any kind are unstable in normal bus operations and will not be carried because of the safety risk.

Maintenance

All scooters require regular maintenance. Refer to User Manual for specific details.

Licence & Insurance Requirements

In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.

Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Taiwan