More Details

Drive system
A roped drum, braked gear motor with a 0.5 kw capacity. The lift requires a 240v AC power supply or a standby power supple of 24v DC.

Guide rails
Extruded aluminum.

Battery back-up
Lowers lift to the ground (lowest level) in event of mains power failure. The users drives the lift to the ground floor using the standby power supply.

Safety features
* The lift requires a key for operation which can help prevent unauthorized use. There are also remote control pendants which when activated will bring the lift to the corresponding floor the user is on.
* The lift comes with full height lift curtain protection and automatic lighting inside.

Method Of Use

The lift control has a 'hold to run' handle to operate when in use, the control handle requires constant pressure to activate the lift. The lift is quiet during operation and incorporates soft starting and stopping.

Considerations

The lift is not designed for wheelchair use. Note that the door width is only 610mm

Lift Registration
In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete the WorkCover form PIR (Plant Item Registration)January 2011 Application for the registration of an item of plant

A fee of $65 is charged for a lift installed in a public place. There is no charge for a lift installed in a private home. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is compulsory that the lift in a public place be inspected annually by a competent person. WorkCover requires payment for registration as well as an annual fee.

Request further details from the supplier or contact WorkCover NSW.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Price Guide

Pricing starts at $25,000 + GST (if applicable)
You don?t pay GST if the lift is for someone with limited mobility

Models

Only one model available.

Options

* Folding seat
* Handrails in suitable location for the user/s
* Additional remote control units
* Telephone
* Remote service monitoring

Additional Dimensions

Door width....... 610 mm
Overall Width.... 1030 mm
Overall Depth.... 680 mm
Weight (kg).......105 kg
Speed (mm/sec)... 150 mm/s

Installation

Installation will usually take two days. No lift shaft is required. The supplier can arrange full installation through licensed tradesmen.

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards

TGA
Many of the items on the ILC NSW website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.