Short Description

A range of brass taps in three lever lengths. Taps are available in pairs with red and blue (hot and cold) indicators. They are suitable for mains pressure installation only. They can be fitted with standard jumper or ceramic disc valves and have a selection of brassware outlets. They are vandal resistant and suitable for heavy duty commercial use.

Options

. jumper valve or three quarter turn ceramic discs
. warm / cold sets with yellow and blue, available as a special manufacturing order

Models

Selection of brassware, outlets, handles, levers and adaptors for different kit combinations.
Available as:
. Basin / Hob Sink Brassware with handles, jumper valves or three quarter turn ceramic discs
. Pillar Tap with handles
. Cistern Tap
. Washing machine tap
. Basin Top Assemblies
. Wall Top Assemblies
. Bib / Pillar Top Assemblies

Above come with jumper valve or three quarter turn ceramic disc options

More Details

. Caroma Taps G Series products are purpose designed and manufactured in strong, durable DR brass with a long lasting, scratch resistant chrome finish.
. G Series tapware is easy to operate and easy to clean, and being vandal resistant, is suited to heavy duty commercial and public utility applications.

Types of tap operating mechanism:
Capstan style four prong taps with smooth surfaces.
Pairs with red and blue, hot and cold indicators
Application: basin, sink, washing machine, cistern
Mounting options: wall, bench
Operation: rate of water flow is adjusted by turning tap handle
Temperature: Hot water temperature should not exceed 80 degrees C at the valve outlet. Ceramic disc cartridges are rated at 80 degrees C continuous maximum temperature.
Pressures: Hot and cold water pressures should be equal.
Finishes and colours: chrome, red and blue indicator buttons

Installation

Require professional installation by a licensed plumber.
In public buildings, taps should be installed by a licensed plumber to comply with AS 1428

Standards

For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Australia