Short Description
The Sentech Stage IV 2000 is a microprocessor controlled Alternating Pressure Relief and Low Air Loss mattress replacement system. The two therapies can be combined or operated independently.
Options
Bolster coverlet
Bedside Air Chair
Custom widths for bariatric needs
Models
Sentech Stage IV 2000
Sentech Stage IV Millennium 3 multi zone, advanced therapy offers greater pressure control
Sentech Thera-Turn Millennium - lateral rotation system
| Specification |
Mattress Replacement |
| Height |
216 mm Fully Inflated |
| Length |
2032 mm Fully Inflated |
| Load Capacity (supplier stated) |
From 20 kg to 230 kg |
| Weight (kg) |
9.98 kg |
| Width |
915 mm Fully Inflated |
Additional Dimensions
Compressor
Weight (kg) NSW................................... 7.7 kg
Height NSW........................................ 310 mm
Width NSW......................................... 368 mm
Depth NSW......................................... 153 mm
More Details
MATTRESS STRUCTURE
165mm air cells integrated with a 75mm foam mattress. Air cells are individually replaceable.
Air retained in case of power loss.
Carry handles
Emergency CPR pull, 8 second deflation starting at bed head
COVER
Quilted multi layered anti-shear fabric that reduces friction. It is vapour permeable (breathable), reducing moisture and heat build up. Zipper - removable for washing.
Dedicated low air loss and air flotation hose connects from controller to cover.
ATTACHMENT
Straps for securing to bed frame
THERAPIES
The alternating pressure feature provides relief by deflating and inflating every other air cell on a timed interval. The 2000 system provides continuous movement of air cells to alleviate constant pressure and enhance circulation. The deflated air cells provide pressure relief, while the inflated air cells support the patient's weight.
The controlled Low Air Loss (LAL) feature provides an optimum temperature environment to assist in patient healing and comfort. LAL therapy is delivered through a patented Coverlet that provides a flow of diffused air directly to the patient's skin through thousands of microscopic vents.
ELECTRONIC CONTROLLER (PUMP)
The electronic controllers provide a real-time display of air pressure for both the inflated and deflated cells. The amount of pressure to support a patient can be set automatically based on patient height and weight or can be manually set for custom configurations.
Fowler Boost automatically adjusts pressure for inclined or seated patients
Flexible Air Floatation mode
Visual monitoring and Sensor Technology
Non volatile memory, returns to previous setting if power is interrupted
Max Inflate mode allows for a firm surface during nursing protocols
Compressor driven pump for reduced noise
Cycle time: 5 minute
Hose connectors: Press on
Factors To Consider
All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (eg correct inflation levels), a different product may need to be considered.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp
Approvals: TGA / C-tick
Place Of Manufacture
USA
subscribers
