Short Description

A mobile, powered hoist which may be used to lift and transfer a person to and from a bed, chair or the floor. It has an optional pivot frame which can assist with positioning the occupant in a sitting or lying posture while being transferred. Suitable for domestic and healthcare facility use. Load capacity is 205kg.

Options

* Weighing device (scales)
* Slings
* Pivot Frame

Models

Only one model is available

More Details

* Head and leg clearance is sufficient to allow a patient to be easily rotated even when at maximum lift height.
* The lifter's range allows for easy lifting from the floor and at a height of 2000mm leaves a generous clearance over high beds or bath sides.

Finish
Steel framed, epoxy coated

Angle and Type of Mast
Upright

Point of Battery Attachment on Mast
Mid mast

Shape of Base
U shaped

Boom
Angled boom with padded end

Spreader Bar
Standard spreader bar with two attachment points at each end for the slings

Castors
Swivel, lockable (rear)

Push Handle
U shaped attached near top of mast

Method of Operation
Raise and Lower - Hand held controls attached to the base of the mast and are on an extendable cord.
Opening Legs of Base -
- manual operation - via upright lever
- powered operation - hand held control operates battery powered opening and closing

Power Source
Battery, light indication for full charge or need to recharge, safety features include emergency lowering and shut off button.

Battery Recharging
Separate recharger (remove battery and take to recharger at power point)

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Australia