Short Description
A medium sized mobile, battery operated hoist which may be used to lift and transfer a person to and from a bed, chair or the floor. The hoist is compatible with a standard spreader bar or tilting frame / pivot frame. Suitable for domestic and healthcare facility use.
Options
* Tilt pivot frame
* Weighing Unit
* Four point yolk
* Slings in a range of sizes and styles
Models
* Alto Lift 200 - a medium sized heavy duty patient lifting hoist with a load capacity of 200kg
* Sonata 150 Compact Mobile Patient Lifting Hoist with a load capacity of 150kg
Specification |
Standard |
Base Height (clearance) |
125 mm |
Base Length |
1150 mm |
Base Width Maximum (int measurement open) |
1130 mm |
Base Width Minimum (ext measurement closed) |
645 mm |
Height |
Unknown |
Load Capacity (supplier stated) |
200 kg |
Spreader Bar Height |
From 362 mm to 1785 mm |
Tilting Frame Height |
Unknown |
Weight of Heaviest Part |
Unknown |
Additional Dimensions
Lifting Range..................................... 1060 mm
More Details
Frame
This steel framed, epoxy coated hoist has an upright mast. A rectangular shaped push handle is mounted at the top of the mast.
Boom
An angled boom with a padded end and either a standard spreader bar with two attachment points at each end for the slings or a tilting pivot frame (uses pivot slings with keyhole fittings) .
Controls
Hand held controls are attached to an extendable cord.
Base
The 'U' shaped base has electric leg spread.
Slings
See Options
Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Compliant with ASA ISO 10535-2002
Compliant with ISO 10535:1988
Place Of Manufacture
NSW Australia